gas shield
英 [ɡæs ʃiːld]
美 [ɡæs ʃiːld]
网络 气体保护; 凹形槽; 气罩
双语例句
- Therefore, Welding in cast iron using CO_2 gas shield welding was available and it's cost was also lower.
说明了以CO2气体保护焊进行铸铁的焊补是可行的和经济的。 - The article introduces a technique of repairing the crack in the moving crosshead of an extrusion press, based on CO2 gas shield welding.
本文介绍了一种采用二氧化碳气体保护焊对挤压机穿孔动梁断裂在线修复技术。 - The Technology Test of Flux-cored Solder Wires for CO_2 Gas Shield Welding
药芯焊丝CO2气体保护焊工艺研究 - CO_2 Gas Shield Welding of API Beam Pumping Unit
API抽油机游梁的CO2气体保护焊接 - CO2 gas shield welding
二氧化碳气体保护焊 - Application of Rich Ar Gas Shield Welding with Metal Powder Cored Wire on Rock Bit
金属粉芯焊丝富氩气体保护焊在钻头中的应用 - So the effective autocontrol to the penetration of welding needs to be settled in CO_2 gas shield arc welding process.
因此，CO2气体保护焊焊接过程中，有效地实施对焊接熔深的自动控制是需要解决的问题。 - Effect of Cu-plating Quality of Gas Shield Welding Wire on Its Rust Prevention Property
气保焊丝镀铜质量对其防锈性能的影响 - Comparison and Analysis of Two Kinds of Gas Shield Welding Wire
两种气保焊丝产品的对比分析 - Organizational analysis of roller with CO_2 gas shield bead welding
CO2气体保护堆焊榨辊轴的组织分析 - Practical Spatter Control Technique in CO_2 Gas Shield Welding
CO2气体保护焊飞溅的实用控制技术 - Application of CO_ 2 gas shield arc welding in thick plate
二氧化碳气体保护焊在厚板上的应用 - CO2 gas shield arc welding is a high efficient and high qualitative welding method.
CO2气体保护焊是一种高效、优质的焊接工艺方法，但是其在焊接过程中存在的大量飞溅和焊缝成型差这两个问题制约着CO2焊的推广。 - Re melt deposit welding process is proposed in this paper. To realize the technology, plasma arc, TIG arc, high frequency induction, gas shield continuous stove and MSW are adopted.
提出熔敷焊接工艺方法，采用等离子弧、TIG电弧、高频感应、气保护连续炉、真空炉和模中熔铸工艺实现了熔敷焊接工艺方法。 - The CO2 gas shield welding is used in the production due to a great deal of rectangle steel pipes and sheet steels are employed in the bus body frame.
客车车身骨架中大量使用了矩形钢管和薄钢板，在生产中一般使用CO2气体保护焊进行焊接。 - The fracture during ER70S-6 wire rod drawing of gas shield welding wire steel is analysed.
对ER70S-6气保焊丝钢在拉拔过程中的断裂问题进行分析。 - According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
在此基础上，采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。 - Based on this project, a hardware control system of SCR CO_2 gas shield arc welding base on microprocessor MSP430F449 was designed, and debugging had been completed.
在此基础上，设计了以单片机MSP430F449为核心的晶闸管CO2焊机的硬件控制系统，并且进行了调试。 - For the plates with the same& different thickness on the canister part of the kiln, half automatic CO_2 gas shield welding is used for good quality, high efficiency and reliability.
对回转窑筒体等厚和异厚板采用细滴过渡CO2气体半自动保护焊焊接工艺技术，高效优质，合理可靠。 - This paper illuminates the construction, principle and operation of NB series CO 2 gas shield welding machine, lists its common failures, analyzes the reason and gives out the concrete solutions.
介绍了NB系列CO2气体保护焊机的构成、工作原理及其操作使用，列出了该焊机的常见故障，分析了其产生原因，并给出了具体的处理方法。 - CO2 gas shield arc welding is of high effciency, low cost advance welding technology and widely used in the field of metal structure manufacturing.
CO2气体保护焊是一种高效率、低廉的焊接制造技术，它在金属结构制造业中的应用极为广泛。 - CO2 gas shield arc welding has been widely applied because of its many advantages.
CO2气体保护焊由于自身所具备的许多优点，在生产实践中得到了广泛应用。 - OVERALL PROCESS MANAGEMENT ON GAS SHIELD EQUIPMENT This paper introduces the details of the welding of the supporting components with the CO 2 gas shield welding, and the compares it with other welding methods.
详细介绍了采用CO2自动焊焊接汽车支承组件的工艺方法，论证了3个方案，确定采用双层焊工艺方案，并与其他焊接方法进行了对比。 - During the practical CO_2 gas shield arc welding process, some complicated problems have often been encountered.
在实际的CO2气体保护焊焊接过程中，经常遇到一些复杂的施焊条件。 - The Structure and Properties of Welded Joint of Cast Iron by CO_2 Gas Shield Welding
CO2气体保护焊焊补铸铁的焊缝组织与性能 - To analyze the rusting cause of gas shield welding wire and effect of chemical Cu-plating quality on its rust prevention capability.
分析气体保护焊丝的锈蚀原因及化学镀铜质量对焊丝防锈能力的影响。 - In this paper, the seam tracking technology with non contact ultrasonic sensor is introduced into gas shield arc welding.
将非接触超声传感焊缝跟踪技术引入到气体保护焊中。 - The study of Copper and Steel Welding with CO_2 gas shield
铜与钢的二氧化碳气体保护焊实验研究 - Application of STT gas shield welding in all position Gas Station
STT气体保护焊在全位置半自动焊中的应用 - It emphasizes MAG welding is superior to CO_2 welding process in reducing splash of during melt drop transition, improving weld forming and increasing weld metal impacting toughness through comparing of process performance of CO_2 gas shield welding and MAG welding.
通过CO2气体保护焊和混合气体保护焊（MAG）工艺性能的对比，强调MAG焊在减少熔滴过渡过程中的飞溅、改善焊缝成型、提高焊缝金属冲击韧性方面优于CO2焊接工艺。